Detailed Product Description

Detailed Product Description The separate pressurized solar water heater is

composed of solar collector, storage tank, controller, working station and

installation parts. Working principle: * When the discrepant temperature of

the solar collector and water tank reaches or not reaches the set value, the

controller shall start or shut the circulation pump automatically. * The

circulation pump makes water circulate automatically. * In case the

temperature of the water tank does not reach Tmax, then start the auxiliary

heating device. Product specification: * Inner tank: Stainless steel (SUS304

2B) Thickness: 1.2-2mm * Outer tank: Stainless steel (SUS304 2B) Thickness:

0.3-0.5mm * Insulating layer: Foaming polyurethane Thickness: 55mm Heat

preservation: 72 hours * Highly efficient all glass vacuum tube or

superconductive pipe * The number of tube: 10pcs, 12pcs, 15pcs, 16pcs, 18pcs,

20pcs, 24pcs, 30pcs, 36pcs * Water capacity: 78L-300L * Optional Electric

Booster: 1500w

Product Feature
Features: 1) Collector separates with the storage tank. The tank can be put

anywhere of the house. 2) The collector can be put on both tilted roof and

flat roof. 3) Module design harmony with the building perfectly. 4)

Intelligent control and automatic operation. 5) If the solar water heater uses

superconductive pipe, it can still in service even with several tubes breakage

6) Multifunction: Bathing, washing, domestic heating.